Lutron Connect Bridge
The Lutron Connect Bridge creates a link between a RadioRA 2 or HomeWorks QS system and the Lutron cloud, enabling remote access to your system.
Features
• Works with the Lutron Connect app (Android® and iOS®)
• Provides remote access for control and monitoring of system via Lutron Connect app 1,2
• Timeclock syncing to always ensure accurate system time
• Compatible with Apple HomeKit technology for up to 99 zones 2 – Uses Siri voice control to adjust lights and shades
• Sonos® endorsed integration 3
• Integrates with Amazon® Alexa®-enabled devices 4
• Supports geofencing from the Lutron Connect App
Power
Power Supply Kit (CONNECT-BDG2-3): 5 V- 1000 mA; cable length 6 ft (1.83 m)
Typical Power Consumption
1.3 W Test conditions: LED on, Ethernet cable plugged in, powered by the 5 V- power supply
Environment
Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% non-condensing humidity. Indoor use only
Communications
Internet connection is required for initial setup, to maintain system date / time, for remote access from the Lutron Connect app, and to receive periodic firmware updates. Network connection to RadioRA 2 main repeater or HomeWorks QS processor is required.
Protection
Tested to withstand electrostatic discharge without damage or memory loss in accordance with IEC 61000-4-2. Tested to withstand surge voltages without damage or loss of operation in accordance with IEEE C62.41-1991.
Нет вопросов о данном товаре, станьте первым и задайте свой вопрос.