Смарт-панель питания Sivoia QS (QSPS-10PNL)

10-Output Sivoia QS Smart Panel

The Sivoia QS Smart Panel simplifies wiring and organizes installations with multiple Sivoia QS window treatments and other system devices and interfaces. The Sivoia QS Smart Panel is designed to be hardwired into a standard 120- 240 V~ circuit. Each panel contains ten NEC® Class 2/PELV outputs that provide power and communication to connected devices.

Features

• Ten NEC® Class 2/PELV outputs capable of operating Lutron Sivoia QS shades, drapery drive units, keypads & accessories

• Contains power supplies which are compliant with U.S. Department of Energy Efficiency Level VI

• No replaceable fuses required for overload/miswire protection

• Simple wiring topology to connect QS communication between shades and other system components

• Smart diagnostics verify system communication and reduce installation time

• Easy system testing with manual override buttons for shades and lighting

Power

• Input: 120-240 V~ 50/60 Hz 10 A

• Each output: 35 V- 143 mA 5 W

• Each output is capable of powering one Sivoia QS shade or drapery drive unit, OR up to 8 QS PDUs

Input Wiring

• 14 AWG - 10 AWG (2.5 mm2 -4.0 mm2 ) single wire, solid or stranded

• Torque terminal screws to: 5 in-lbs (0.5 N•m) • Strip length: 5 ?16 in (8 mm)

• Maximum 1 panel per 15 A circuit breaker (limiting factor is inrush current)

• Maximum 2 panels per 20 A circuit breaker (limiting factor is inrush current)

Output Terminal Wiring

• 22 AWG–12 AWG (0.5 mm2-4.0 mm2) single wire, solid or stranded (wire gauge affects allowable length of run; see Wiring Rules)

• Torque terminal screws to: 5 in-lbs (0.5 N•m)

• Strip length: 1 ?4 in (6 mm)

• Ten (10) output terminals for shade power/communication (4-conductor)

• Two (2) link terminals for communication pass-through (3-conductor)

Environment

• Ambient Temperature Operating Range: 32 °F to 104 °F (0 °C to 40 °C)

• Relative humidity: 0% to 90% non-condensing

• For indoor use only

• Thermal dissipation – with 1 window treatment and keypad per output: 20 BTU/hr – with load of 5 W per output: 52 BTU/hr